 |
DC Battery Charger providing safe and charging for LiFePo4 batteries with integrated BMS avoiding exposure to heat and moisture
Product Details:
| Place of Origin: | Shenzhen |
| Brand Name: | Oxiang /OEM |
| Certification: | CE.RoHS,FCC |
| Model Number: | B2B1260 |
|
Detail Information |
|||
| Charging Mode: | CC/CV | Max Output Current: | 15.4A |
|---|---|---|---|
| Storage Temperature: | -40℃~+85℃ | Start Battery: | 12V |
| Current: | B2B:60A | Output Power: | 500W |
| Max Input Current: | 70A | Weight: | 1.2 Kg |
| Productname: | DC Battery Charger | Power: | 24W |
| Accessories: | MT-2,BT10,TRS | Main Battery: | 12 |
| Battery: | Lithium Gel Agm Lead-acid | Outputcurrent: | 10A |
| Function: | App Control | ||
| Highlight: | 1080P Smart Wifi Doorbell Camera,IR Cut Smart Wifi Doorbell Camera,No Color Deviation Smart Wireless Doorbell |
||
Product Description
INSTALLATION ATTENTION
• Do not expose the DC/DC charge tr o rain or snow.
• Do not use the DC/DC charger if it has received a sharp blow, been dropped,
has cracks or openings in the case, or is damaged in any other way.
• Do not install the charger near a heat source.
• This charger should not be installed in an airtight or poorly ventilated area.
• Do not attempt to open the DC/DC charger. There are no user serviceable parts
except for user replaceable fuses.
• Do not use the DC/DC charger with damaged cables.
• It is strictly forbidden to disassemble the charger and/or modify the housing in
any way.
!
CONNECTIONS ATTENTION
•
• It is important to choose the correct battery type, a wrong choice can cause irreversible
damage, The LITHIUM charging cycle is only compatible with LiFePo4 batteries with
integrated BMS (Battery Management System).
Maintenance
• If necessary, the fuses must be replaced by identical products.
• This charger cannot be disassembled and the electronic board is inaccessible.
• Therefore, with the exception of the fuses, all on-site maintenance is prohibited.
• Disconnect the DC power supply before servicing, cleaning or working on
circuits connected to the DC/DC booster.
• Once disconnected, isolate the battery connection terminals.
• It is important to ensure that the area around the battery is well ventilated.
• It is important to ensure that the battery voltage matches the output voltage
• Always use ungrounded batteries. If necessary, the battery grounding connection
should be made last.
To prevent overheating, make sure the connections are properly tightened
Want to Know more details about this product
